How To
Step-by-step instructions on how to use the Boost N' Inflate to jump start and inflate tyres.
Boost N Inflate
Boost N Inflate Pro
Tyre Repair Kit
Jump Start Instructions:
Connect the jump cables to the Boost N’ Inflate.
Attach the red clamp to your battery’s positive (+) terminal.
Attach the black clamp to the negative (–) terminal.
Wait for the light to turn solid green — this means it’s ready.
Start your engine.
Once running, disconnect the clamps (keep the engine running).
Tyre inflation Instructions:
Connect the air hose to the Boost N’ Inflate.
Attach the hose to your tyre’s valve stem and press down the tab.
Power on the device.
Use the + / – buttons to set your desired PSI.
Press the start button — inflation will begin.
The pump will automatically stop once the target PSI is reached.
Jump Start Instructions:
Connect the jump cables to the Boost N’ Inflate Pro.
Attach the red clamp to your battery’s positive (+) terminal.
Attach the black clamp to the negative (–) terminal.
Wait for the light to turn solid green — this means it’s ready.
Start your engine.
Once running, disconnect the clamps (keep the engine running).
Tyre inflation Instructions:
Connect the air hose to the Boost N’ Inflate Pro.
Attach the hose to your tyre’s valve stem and press down the tab.
Power on the device.
Use the + / – buttons to set your desired PSI.
Press the start button - inflation will begin.
The pump will automatically stop once the target PSI is reached.
Tyre Repair Kit Instructions:
Identify the puncture
Remove embedded object
Clean puncture hole with the spiral T-handle tool then leave it inserted in the puncture hole
Thread rubber strip through the needle to the T-handle insert tool
Remove spiral T-Handle tool and insert the T-handle insert tool
Once pushed in all the way, slowly remove the T-handle insert tool and twist. Cut the rubber excess.