car with engine bay open and Connecting jumpstarter leads to a cars battery

How to Maintain Your Jumpstarter for Maximum Performance & Longevity

A jumpstarter is a must-have tool for every driver, ensuring that a dead battery never leaves you stranded. But just like your car’s battery, a jumpstarter requires proper maintenance to be reliable when you need it most.

If neglected, your jumpstarter can lose efficiency, fail to hold a charge, or even stop working altogether—which defeats the purpose of having one. In this guide, we’ll cover everything you need to know to keep your jumpstarter performing at its best for years to come.

We'll also discuss why the Boost N’ Inflate—a jumpstarter and tire inflator in one—is the best all-in-one emergency solution for drivers.

 


Why Jumpstarter Maintenance is Important

✔️ Ensures reliable performance in emergencies.
✔️ Prevents battery degradation and failure.
✔️ Extends the lifespan of your jumpstarter.
✔️ Keeps you prepared for roadside emergencies.
✔️ Saves money by avoiding frequent replacements.


How Long Does a Jumpstarter Last?

A high-quality jumpstarter like the Boost N’ Inflate can last 5+ years if properly maintained. Lower-end models often degrade within 3 years without proper care.

Factors that affect lifespan include:
🔹 How often it’s used (frequent use drains battery life faster).
🔹 Storage conditions (extreme heat/cold can shorten lifespan).
🔹 Charging habits (keeping it charged extends its life).

Let’s go over the key steps to maintain your jumpstarter and keep it ready for action when you need it.


1. Charge Your Jumpstarter Regularly

🚗 How often should you charge it?
✔️ If unused, recharge every 3–6 months.
✔️ If used, recharge immediately after jumpstarting.

Jumpstarters lose charge over time, even when not in use. If left uncharged, the battery can permanently degrade and stop working.

🔹 Why the Boost N’ Inflate is Better: Unlike standard jumpstarters, the Boost N’ Inflate’s high-capacity 10400mAh battery holds a charge for months and recharges quickly.

✔️ Pro Tip: Set a reminder every 3 months to check your jumpstarter’s charge level.


2. Store Your Jumpstarter in a Safe Place

Extreme temperatures and moisture can damage a jumpstarter’s battery and electrical components.

Best Storage Conditions:
✔️ Cool, dry area (20°C–25°C is ideal).
✔️ Inside a glove compartment or trunk (not exposed to direct sunlight).
✔️ Away from water, humidity, and metal objects that could cause electrical discharge.

Avoid storing in:
❌ A hot car in summer (heat degrades lithium-ion batteries).
❌ A damp garage (moisture can corrode internal components).
❌ A freezing car overnight in winter (batteries lose efficiency in cold).

🔹 Why the Boost N’ Inflate is Better:
The Boost N’ Inflate is designed for harsh conditions—it’s compact, weather-resistant, and easy to store in any vehicle.


3. Test Your Jumpstarter Regularly

A jumpstarter that hasn’t been used in months might not work when you need it.

🔹 How often should you test it?
✔️ Every 3–6 months, connect it to a battery and check if it delivers power.

If your jumpstarter fails to start a car, recharge it fully and try again. If it still doesn’t work, it may be time for a replacement.

🔹 Why the Boost N’ Inflate is Better:
The Boost N’ Inflate’s built-in digital display makes it easy to check battery levels—so you’ll never be caught off guard.


4. Keep the Jumpstarter’s Clamps and Cables Clean

Dirt, rust, and corrosion on jumper cables and clamps can cause poor electrical contact, reducing effectiveness.

How to Clean Your Jumpstarter’s Clamps:
✔️ Wipe with a dry cloth to remove dirt.
✔️ Use a baking soda & water solution to clean corrosion.
✔️ Apply a light coat of dielectric grease to prevent future corrosion.

🔹 Why the Boost N’ Inflate is Better:
Its premium copper clamps and reinforced cables ensure strong, durable connections that won’t wear out easily.


5. Avoid Overcharging Your Jumpstarter

Most modern jumpstarters have built-in overcharge protection, but leaving them plugged in for too long can still degrade battery health.

✔️ Unplug the jumpstarter once fully charged.
✔️ Use only the recommended charging cable to avoid damaging the battery.
✔️ Don’t leave it plugged in for more than 24 hours.

🔹 Why the Boost N’ Inflate is Better:
It features intelligent charging management, preventing overcharging and overheating.


6. Use Your Jumpstarter Correctly

Misusing your jumpstarter can damage both the device and your vehicle’s battery.

Best Practices:
✔️ Only use it for jumpstarting (not for prolonged power use).
✔️ Follow the correct connection order:

  1. Attach red clamp to positive (+) terminal.
  2. Attach black clamp to negative (-) terminal.
    ✔️ Do not use a damaged jumpstarter (cracks, overheating, or leaks).

🔹 Why the Boost N’ Inflate is Better:
✔️ It includes reverse polarity protection, preventing damage if cables are connected incorrectly.


7. Replace the Battery When Necessary

If your jumpstarter stops holding a charge, its battery may be failing.

Signs you need a replacement battery or new jumpstarter:
Takes longer to charge than usual.
❌ Holds charge for less than a month when unused.
Fails to jumpstart a vehicle after multiple attempts.

🔹 Why the Boost N’ Inflate is Better:
It features a high-quality lithium-ion battery that lasts longer and performs better than standard lead-acid jumpstarters.


FAQs About Jumpstarter Maintenance

1. How long does a jumpstarter stay charged?

Most jumpstarters hold a charge for 3–6 months, but the Boost N’ Inflate’s powerful battery lasts longer.

2. Can a jumpstarter get damaged if left in the car?

Yes, extreme heat or cold can degrade the battery. Store it inside the car (glove box or under the seat), not exposed to sunlight.

3. How many times can I use a jumpstarter before recharging?

It depends on the capacity:
✔️ Small jumpstarters: 3–5 uses per charge.
✔️ High-capacity jumpstarters like Boost N’ Inflate: 8–10 uses per charge.

4. Can I use my jumpstarter to charge other devices?

Yes! Many modern jumpstarters double as power banks. The Boost N’ Inflate features USB ports for charging phones, tablets, and more.


Conclusion: Why the Boost N’ Inflate is the Best Choice

A jumpstarter is only as good as its maintenance. By following these 7 key maintenance tips, you can extend the life of your jumpstarter and ensure it’s always ready when you need it.

💡 Want an all-in-one emergency tool? The Boost N’ Inflate is the perfect solution—it’s a jumpstarter, tire inflator, and power bank in one compact device!

🚗 Stay prepared. Get the Boost N’ Inflate today! 🚗

Back to blog

Leave a comment